News

In this article, we are introducing function of lights of trash truck. Headlamps: If you are driving one truck at night, then bright headlamps will be needed because its sufficient brightness can light the road condition. If the truck`s light is replaced by xenon lights, then it is much better cause which can be used very long, and also can protect driver's eyes if driving high quality road sweeper. Rear lamps: For people with poor eyesight, if rear lamps are too weak, then it will not achieve any effect. So choosing sufficient rear lamps of garbage compression truck what is very important. Taillights: If taillights got problem, then vehicle will get trouble. Generally. in the choice of taillights, it only pay attention on choosing brighter ornamental lights and equipped them on the truck. Fog lamps: it is also called spotlight, which mainly used in relatively harsh environments. The truck company shall equip good fog lams on vehicle to ensure driver's vision. To choose more appropriate fog lights, otherwise it easily lead to security incidents on China refuse truck factory.

1: Water tank fire truck should be charged often when it is not in work. 2: Truck should be checked that if there have oil leakage or not. If having, then all screws and seals should be checked carefully. If they are broken, users shall ask truck supplier to provide new screws and seals for changing. 3: Vehicle`s pressure should be in safe driving. After some hours or days, operator check pressure gauge to view if fire fighting truck is in safe pressure. If not, there must have air leakage on pipes or pump, and then checking pumps springs and seals. 4: To keep four wheels` air pressure are enough and all are equal. Most truck factory to produce trucks` rear tires load more. Rear wheels pressure is from 7Pa-8Pa and front wheels pressure is from 5Pa-6Pa. 5: Ensure all oil, water, electricity and gas are full. Oil would be divided into two kinds: one is vehicle fuel, and another one is gear and hydraulic oil. All on fire truck supplier should check very carefully. If lack, all should be fill full soonest.

There have five operation steps for China high pressure jetting truck using to save fuel as following: 1: When truck just derived at firstly, do not pedal heavily which will cause fuel consumption increased. Driver shall pedal softly to drive truck slowly. 2: When truck derived faster or slower in a road, then fuel consumption of the truck and vacuum truck will be increased. The best driving way is keeping 60~90km/h for truck in road. 3: Too long idle time of sewer cleaning truck will still increase part fuel consumption, especially if there has traffic jams which over 5 mins, engine of truck should be closed. 4: If driver often hang second or third gear at low speed (40km/h less) which will cost more fuel. So truck shall keep over than 60km/h at five speed to save engery. 5: Do not brake rashly. It will increased fuel consumption. So it is better to brake advance in flat road which is safe and fuel consumption for high pressure jetting truck for sale.

Some end-users always call us why we written one item in street sweeper operation manual that this truck should be maintained after the rain. Because if the truck will not get maintain after rain in long time, some main parts on truck will be damaged badly and influence truck function largely. So users shall do this step strictly. How to maintain this truck after rain? Following six steps can be following: (1) Turn on air condition in cold position when in rainy time (2) Put one unit wet-away small machine (3) Put some papers in cabin of China road sweeper (4) Open all doors and rear storage container cover after the rain (5) Clean all covers on seats and put them under sunshine (6) Maintain truck`s chassis according to chassis manual step by step Above six steps will not only be used in this truck, but also used in bucket trucks. If users still do not understand those steps clear, please come to our street sweeper supplier and get some maintain video.